Skenes Contact Point Lab

Where they hit it · How hard · What that buys you
Data —
— pitches · —
Source: Statcast bat tracking

For PaulThis tool maps where hitters' bats meet the ball on every pitch you throw, against the damage they do with it. Two numbers carry most of the weight: contact depth (how late hitters are — lower = jammed deep, good) and Heart xwOBA (damage when pitches catch the middle — green means stuff beats location, red means location matters). Five-second arsenal summary: trust the shapes on everything except the four-seam, and locate the four-seam up.

The framework

When the bat meets the ball depends on whether the hitter is on time. Late swings make contact behind the front of the plate — jammed, deep. On-time swings hit the ball even with the plate. Early swings make contact way out in front, often weak grounders pulled foul or rolled over.

Your four-seam contact depth sits at 25–27 inches across the league. That's deep. Hitters are consistently late. Murph's read is real, and the data confirms it.

But "they're late" isn't the whole story. Some pitches in your kit don't need hitters to be late — the shape suppresses contact quality on its own. And there's one pitch where being late is doing most of the work, and a mistake gets punished. Worth separating which is which.

Your outlier pitches

I pulled every pitch you've thrown in the heart of the plate (Statcast zones 2, 4, 5, 6, 8 — the middle five-cell cross). League xwOBA on contact in that area runs about .425. Hitters who get a mistake there punish it. Yours, by pitch and handedness:

Slider (gyro)  vs LHH    .110    (thin: 9 BIP)
Sweeper        vs LHH    .190
Changeup       vs LHH    .210
Slider (gyro)  vs RHH    .240
Changeup       vs RHH    .260    (thin: 4 BIP)
Sweeper        vs RHH    .270
Sinker         vs RHH    .300
Splinker       vs LHH    .320
Curveball      vs RHH    .330    (thin: 6 BIP)
Splinker       vs RHH    .340
Four-seam      vs RHH    .350
Sinker         vs LHH    .380
Curveball      vs LHH    .420
Four-seam      vs LHH    .450    ← only cell over the league baseline

Thirteen of fourteen cells beat the MLB heart-of-plate average. That's the empirical fingerprint of stuff beating location. The gyro slider, sweeper, changeup, sinker to righties, splinker — these are pitches where, even if you miss into the heart of the plate, hitters can't punish you. The shape is doing the work.

The four-seam is the exception, and there's a deeper story underneath it.

The four-seam

Against lefties in the heart of the plate, your four-seam runs .450 — slightly worse than league. Against righties, .350 — slightly better. Both pitches are excellent in your overall ledger because you don't live in the heart with them, but the heart numbers tell you what happens when you miss.

I split your 214 heart-of-plate four-seams into two buckets:

  • Beaten (xwOBAcon under .250 — weak contact): 92 pitches
  • Punished (xwOBAcon over .500 — real damage): 70 pitches
                  Beaten     Punished
   Velo            98.3 mph   98.4 mph
   Spin            2244       2241
   Extension       6.62 ft    6.61 ft
   IVB             0.92 ft    0.90 ft
   Contact depth   26.1"      27.6"

Identical pitches. The only thing separating weak contact from a barrel is 1.5 inches of contact depth. That's not stuff. That's timing.

When a four-seam catches the heart of the plate, whether it gets crushed or rolled over comes down to whether the hitter is a hair late or a hair on time. Your stuff doesn't beat them at that location — your location does.

What buys you that fraction of a second? Vertical location. Splitting your four-seam contact by zone height vs lefties:

  • Top of zone: contact depth ~21″ (deeply jammed)
  • Middle of zone: ~24″
  • Bottom of zone: ~26″

A five-inch swing in how late hitters are, driven by nothing but how high you locate it. That's why "locate up" works. Not specifically up-and-in — up. The top edge across the whole plate width jams them equally. Middle-down and middle-middle are where contact gets dangerous. Same physics on the four-seam to righties, with a little more margin.

How to use the tool

Pitch and handedness selectors at the top. Everything updates as you flip.

Stats card. Reads left to right — pitches/whiff% (volume side), BIP/xwOBAcon/Heart xwOBA (contact outcomes), EV/depth/velo (physical picture). The number to watch is Heart xwOBA: green means stuff beats location, red means you need precise location to win.

Pitch Location panel has a toggle. Damage shows xwOBA by zone cell — where hitters do real damage when they connect. Depth shows mean contact depth by cell — where they're late vs where they're on time. Damage tells you "don't throw it here." Depth tells you "throw it here to keep them late."

Contact Point Distribution is the scatter — every batted ball plotted by where the bat actually met the ball in 3D space relative to you. Gold dot is the centroid. Centroid drifting up (out in front) means they're timing the pitch. Staying low (deep) means you're winning.

Damage by Depth at the bottom is the same idea as a curve. Bars are BIP count, line is xwOBA at each depth bucket. The shape is similar across pitches — what matters is whether your contact distribution sits in the safe range or the dangerous one.

Five practical takeaways

  1. Trust your outlier pitches in mistake situations. SL, CH, ST, FS, and SI-to-RHH all survive heart-of-plate misses. Behind in a count or need a strike from a hitter's count, these are the pitches you can throw without worrying about location precision.
  2. The four-seam is a location pitch, not a stuff pitch. Up plays. Down doesn't. Especially vs LHH. Top third of the zone and above is where hitters can't catch it on time. Middle-down is where damage lives.
  3. The gyro slider grades out as the best contact suppressor in your kit (.110 heart xwOBA to LHH, .240 to RHH). Sample is still small — usage hasn't scaled yet. Every signal says trust the design.
  4. Sweeper to RHH at .270 heart xwOBA is your go-to when you need a swing you don't want hurt. Shape beats timing even when located badly.
  5. Curveball to LHH at .420 is essentially league-average in the heart. Chase pitch or buried strike, not a middle-of-the-zone offering.

What this doesn't tell you

  • Bat tracking is rolling sample from May 2024. Numbers will shift as the arsenal evolves.
  • Three cells run thin (SL to LHH, CH to RHH, CU to RHH) and are flagged in the UI. Signals look strong but read directionally.
  • xwOBA on contact only measures contact quality, not how often you avoid contact entirely. Your whiff and chase rates handle that side.
  • Sequencing isn't modeled here. The slider after a four-seam plays differently than a slider after a curve. That's the PS20 Lab's territory.
  • The .425 league baseline is a recent multi-year average. Drifts year to year by 5–10 points.

Bottom line

Your stuff beats location on six of seven pitches in the heart of the plate. The four-seam is the one pitch where location matters more than stuff in the middle — and locating it up is the entire game on that pitch.

Trust the shapes on everything except the four-seam, and locate the four-seam up.
Built from Statcast bat-tracking data, May 14 2024 → present. Validated against Baseball Savant's player page to within rounding error on every aggregate. Tool refreshes after each start — same URL, same toggles. Anything off in the data or a cut you want to see, kick it back to Brian.
Pitch
vs
Read—

Pitch Location · Damage

5×5 grid · cell color = xwOBA on contact · cell size = BIP density. Catcher's POV.
weak .200 — .350 — .500+ damage strike zone

Contact Point Distribution

Where bat met ball · top-down view · up = out in front of batter · down = jammed deep
centroid weak contact (xwOBA < .300) damage (xwOBA ≥ .500)

Damage as a Function of Contact Depth

xwOBA on contact across the intercept-Y axis. Deeper contact ⇢ left. Bars = BIP count. Line = mean xwOBA per bin.